# File generated by xf86config. # --- Fujitsu FMV-475NL/S custmized by shochan@tcp-ip.or.jp --- # # Copyright (c) 1994 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/misc/" # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta RightAlt Meta # RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "PS/2" Device "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice Emulate3Buttons # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "DSTN" VendorName "Matsushia" ModelName "8.5inch" # Bandwidth is in MHz unless units are specified # Bandwidth 25.2 # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. # HorizSync 25.1, 31.5, 36.2, 40.0 # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-75 # VertRefresh 60 # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # 640x400 @ 70 Hz, 31.5 kHz hsync Modeline "640x400" 25.175 640 664 760 800 400 409 411 450 # 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 # 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync # 800x600 @ 72 Hz, 48.0 kHz hsync Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync # --- my (Low-res Double scan modes) --- # 640x200 @ 70 Hz, 31.5 kHz hsync Modeline "640x200" 25.175 640 664 760 800 200 204 205 225 Doublescan # 640x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "640x240" 25.175 640 664 760 800 240 245 246 262 Doublescan # Low-res Doublescan modes # If your chipset does not support doublescan, you get a 'squashed' # resolution like 320x400. # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan # 320x240 @ 72 Hz, 36.5 kHz hsync Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio ModeLine "400x300" 18 400 416 448 512 300 301 602 312 Doublescan # 400x300 @ 60 Hz, 37.8 kHz hsync Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan # 400x300 @ 72 Hz, 48.0 kHz hsync Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan # 480x300 @ 60 Hz, 37.8 kHz hsync Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 63 Hz, 39.6 kHz hsync Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 72 Hz, 48.0 kHz hsync Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Sample Device for accelerated server: # Device configured by xf86config: Section "Device" Identifier "FMV-475NL/S" VendorName "Fujitsu" BoardName "my" VideoRam 512 # Chipset "clgd6205" Chipset "clgd6235" Option "noaccel" # Option "clgd6225_lcd" # Use Option "no_bitblt" if you have graphics problems. If that fails # try Option "noaccel". # Refer to /usr/X11R6/lib/doc/README.cirrus. # To allow linear addressing, uncomment the Option line and the # address that the card maps the framebuffer to. Clockchip "cirrus" EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Colour SVGA server Section "Screen" Driver "svga" # Use Device "Generic VGA" for Standard VGA 320x200x256 Device "FMV-475NL/S" Monitor "DSTN" Subsection "Display" Depth 8 # Omit the Modes line for the "Generic VGA" device Modes "640x480" "640x400" "640x240" "640x200" ViewPort 0 0 # Use Virtual 320 200 for Generic VGA ## Virtual 952 480 Virtual 696 650 # Virtual 800 550 EndSubsection Subsection "Display" Depth 16 Modes "640x400" ViewPort 0 0 Virtual 0 0 EndSubsection Subsection "Display" Depth 32 Modes "640x480" ViewPort 0 0 Virtual 0 0 EndSubsection EndSection